Gangue powder mill machines

Gangue also named as lode mineral, gangue minerals are generally non-metallic minerals, such as calcite, Quartz, kaolin, talc, water mica, chlorite, epidote stone, etc. Types of gangue minerals, content and the symbiotic relationship between the level of ore processing method selection and processing costs tend to have an important impact. With the human growing requirements of the new mineral raw materials and mining, flotation, smelting technologies improve, some no use value gangue minerals future may become the ore minerals.
 
Regarding to gangue processing, HGM series gangue powder mill machine is necessary!
HGM series ultra fine powder mill is a new type machine to grind gangue mineral into super thin Powder. The final Powder size can be from 5micron to 47micron as per 97% passing rate.
HGM series gangue powder mill machine is mainly applied to non-inflammable, non-explosive and brittle materials with Mohs hardness scale under seven, such as calcite, chalk, limestone, dolomite, carbon black, bentonite, kaolin, talc, mica, magnesite, illite, pyrophyllite , roseite, sea-foam, attapulgite , rectorite, diatomite, barite, gypsum, alunite, graphite, fluorite rock phosphate, kalium ore, pumice etc. totally more than 100 kinds of materials.
Finished powder products are in the 325meshs -3000meshs, and yield can be up to 0.5-12 tons per hour. There are five types of Shanghai CLIRIK HGM series gangue powder mill machines, they are HGM80, HGM90, HGM100, HGM100A and HGM125.
 
Working principle of HGM series gangue powder mill machine:
After crushed by hammer crusher, the large materials become small ones and are sent to storage hopper by elevator, edge of then evenly sent to the upper distribution plate of the turnplate by vibrating feeder and sloping feeding pipe. When the powder mill machine is at work, all the grinding rollers are rolling in the ring, and the materials are driven to the edge of the turnplate by the centrifugal force and fall down into the grinding chambers where the materials are repeatedly pressed, crushed and grinded by the rollers. The high-pressure air blower constantly inhales air within the powder mill machine and, in turn, the air flow with crushed materials are brought to the classifier whose high-speed impeller will screen the airflow: the unqualified particle size will fall and return to the mill for being reground while the qualified particle size mixed with air will go into the cyclone powder collector. Most of the qualified powders will fall an exit from the discharging valve at the bottom; a small proportion of the fine powders, with airflow, moves to the dust cleaner, and clings to the surface of the filter bags. At the same time, the fine powders clinging to the surface fall down by the sudden vibration of the filter bags, which is caused by the instantly ejected high-pressure gas controlled by the pulse valve. The materials from the above two lots are sent by the conveyor at the bottom to get finished powders packed. In addition, filtered clean air will be emitted from the air outlet of muffler in the end.
 
Features of HGM series gangue powder mill machine:
1. High efficiency
Under the same finished final size and the same motor power, the capacity of gangue powder mill machine is twice as much as jet mill, mixing grinder and ball mill.
2. Long life cycle of spare parts
The ring and roller are forged by special material with high utilization. Under the same grinding material and finish special size, the lifecycle of spare parts is about one year, which is 2-3times longer than impact mill or turbo mill. Furthermore, the lifetime can reach 2-5 years for grinding calcite carbonate.
3. High safety and reliability
As no rolling bearings or screws in grinding cavity, there are no problems caused by bolts shedding or rapid wear of bearings and seal components.
4. High fineness and flexible adjustment
The final fineness of the grinding materials can be adjusted between 325 meshes and 3000 meshes, and the product fineness can reach D97≦5um.
5. Environment-friendly
The application of pulse deduster and muffler greatly alleviates dust pollution and noise.
 
Model and technical data of HGM series gangue powder mill machine:

Model	HGM80	HGM90	HGM100	HGM100A	HGM125
Ring Diameter(mm)	800	900	1000	1000	1250
Ring Number/pcs	3	3-4	3-4	4	4
Roller Number/pcs	21	24-32	27-36	27-36	40-44
Main Shaft Speed/r. p. min	230-240	200-220	180-200	180-200	135-155
Input Size/mm	≦15
Finished Size/um	5-47(325-3000)
Capacity t/h	0.4-4.5	0.4-5.5	0.4-6.5	0.4-7.5	0.7-10
Outlet Size L*W*H/m	13.9*4*6.2	14.7*4.8*7.2	18*4.6*8.6	18*4.6*8.6	14*9*10.25

Note: This specification is just referencing, any changes are subject to the products.
Should you have any questions, please do not hesitate to contact me.
Phone: 0086-21-20236178
Contact person: Cherry. Zhao
E-mail: clirik_grinder@163.com; cherry201201@hotmail.com
Website:  http://www.clirik.com