How to Extends the Service Life of the Raymond Mill?
The principle of
Raymond mill is that the roller material is rolled on the grinding ring under the action of centrifugal force. The scraping material is sent to the middle of the grinding roller and the grinding ring by the blade, and the material is broken into powder under the action of rolling pressure, and then acts as a fan. The powdered material is blown up through the analysis machine, and the material that meets the fineness requirement passes through the analysis machine, and the heavy grinding chamber is not required to continue grinding. Discharge after meeting the requirements. In this process, Raymond Mill saves 30% to 40% more electricity than other milling equipment, which can greatly reduce the cost of use. The easy-grinding parts of
Raymond mill are the blade, the grinding roller and the grinding ring. These three are the three easy-grinding parts of Raymond mill, which directly contact the grinding of the material.
So how do you slow down the wear and tear of these three easy-to-wear parts? First we need to know what factors are related to wear and tear:
1. The hardness of the material, the harder the material is, the higher the degree of wear and the lower the hardness of the material.
2, for higher hardness materials, you need to choose a better easy to grind parts, such as manganese 13, or better high-chromium alloy materials such as grinding roller rings.
3. Under the condition of ensuring the powdering efficiency, reduce the speed of the Raymond mill as much as possible, so that not only the power consumption can be reduced, but also the wear level can be effectively reduced to prolong the service life.
4. It is necessary to regularly repair the wearing parts and replace the parts with severe wear to ensure the best condition of Raymond mill.
上一篇：Raymond Mill Operation Process
下一篇：HGM Ultra Fine Grinding Mill Models
